Hooka Air Regulator – Keene Engineering
Our low-pressure hooka diving regulator is are designed for easier breathing at lower working pressure. Typical breathing pressure is around 20 to 40 psi. This regulator come from the factory set up to work for lower pressures.
Easy breathing is achieved by a specially shaped housing interior, which is designed to create a pressure drop in the area just before the mouthpiece. Air gets pulled towards the diver’s mouth directly after leaving the valve.
The “Pre-dive/Dive” switch next to the adjustment knob prevents the valve from free-flowing while on the surface.
Scuba regulators are not compatible. Most scuba systems breath comfortable around 120 psi to150 psi.