How to Pan for Gold

Gold flakes and small nuggets in the bottom of a black gold pan

Every prospector starts with a gold pan, and most never stop using one. Keene Engineering calls the pan the most indispensable companion a prospector can have: it's one of the first tools used to find gold and one of the last, even in commercial mining, where it's used to check the value of ore being processed. Here's what you need, how to choose a pan, and a step-by-step way to pan that you can practice at home before you hit the creek.

Why panning works

Panning works because gold is heavy. According to the U.S. Geological Survey, pure gold has a specific gravity of 19.3, while the waste rock it's found with is about 2.5. When you shake a pan full of wet gravel, the gold works its way down to the bottom while the lighter material rises and can be washed off the top. USGS lists the gold pan alongside the rocker and the sluice box as tools that use this difference to separate gold from clay, silt, sand and gravel.

What you need to get started

A kit covers most of this in one box. The 7 PC Gold Panning Kit includes a 1/2 in sifting pan, two green dual-riffle pans, a snifter bottle, tweezers with a magnifier and two glass vials. The 11 PC Gold Panning Kit adds an 8 in pan, a 1/8 in sifting pan, a sand scoop and a magnetic pick-up tool.

Choosing a gold pan

Size

Keene describes 8 to 12 in pans as mainly for sampling and clean-up, the 14 in pan as the most popular all-purpose size, and 16 to 18 in pans as tools for more experienced panners, because a bigger load takes more stamina and technique. We carry pans from 8 in up, including the 17 in Proline Professional Series.

Plastic or steel

Keene calls a molded plastic pan probably the most efficient pan for a beginner. It won't rust, it's about a quarter of the weight of steel, it can be textured to hold gold better, and riffles can be molded right into it. A plastic pan also lets you run a magnet under the pan in the final steps. Steel pans still have their fans. Our Estwing 14 in Steel Gold Pan is solid American steel with creases for separation and a lanyard hole. Keene's tip for any steel pan: remove all the oil before you use it, or fine gold can float right out.

Riffles and color

Riffles trap gold much like the riffles in a sluice. Keene says old-timers call them "cheater riffles" because they let a novice pan almost as efficiently as a veteran. Some examples from our shelves:

  • Pioneer 12 in Gold Pan (blue): high-impact plastic with deep riffles for working material down quickly and smaller riffles for fine panning and the final clean-up.
  • 12 in Dual Riffle Gold Pan (blue): three 1/4 in deep riffles plus micro riffles.
  • Proline 14 in Professional Series: undercut riffles covering nearly 40% of the side, a large flat bottom, and a textured finish to help grab fine gold. Proline makes it in green, blue and black for contrast.
  • Martin Prospecting Original 14 in: a four-sided pan that goes from deep gravity-trap riffles, through medium and fine riffles, to a smooth section for separating micro gold from black sand.

What about a batea?

The batea is a cone-shaped pan. Keene says the traditional wooden batea is heavy and takes a lot of experience to use well, and that it never caught on much outside Central and South America. The modern XP Gold Pan Batea is a 20 in rigid glass-fiber composite with a deep center collection cup and a stainless steel "defragmenter" for breaking up compacted material.

Step 1: Classify your material

A sieve over your pan screens off the bigger cobbles, so you're only panning the finer material. Keene calls a panning sieve a necessary part of a panner's equipment, and BLM's gold panning guide starts by shoveling gravel into a grizzly with 1/2 in holes set over the pan. Check the big rocks for nuggets before you toss them. Our 1/2 in and 1/4 in stainless-mesh classifiers sit right on a 5-gallon bucket.

Step 2: Wash off rocks and clay

Keene suggests panning where the water is at least six inches deep, moving just fast enough to carry muddy water away, and where you can sit comfortably.

  1. Fill the pan about 3/4 full and submerge it just under the surface.
  2. Give it several vigorous shakes back and forth and side to side, but not so hard that material washes out.
  3. Switch to a gentle circular motion so the dirt and clay dissolve and wash out. Break up lumps and roots with your fingers. Pick out the larger rocks once they're washed clean.
  4. Repeat to bring the smaller rocks to the surface and let the heavy material settle.

Step 3: Wash off the lighter sand and gravel

  1. Hold the pan just under the water and tilt it slightly away from you. BLM's guide says to keep the riffles pointed away from you, so they can catch any gold that slips toward the lip.
  2. Swirl side to side with a slight forward tossing motion, so the lighter top layer washes over the edge.
  3. Every so often, level the pan and shake it again so the gold settles back to the bottom.

Repeat until about two cups of heavy material are left. That's your concentrate, often called black sand.

Step 4: Work the black sand down

Keene calls this final concentration the most critical part of panning. Lift the pan out of the water with about an inch of water in it, tilt it slightly toward you and swirl slowly to check for nuggets and flakes you can pick out by hand. Then go back under the water and repeat Step 3 slowly and carefully. If you're using a plastic pan, Keene suggests moving a magnet in small circles under the pan to pull magnetic black sand away from the gold. A couple of drops of detergent in the pan during the final separation breaks the water's surface tension and speeds things up.

BLM's guide adds two good habits: do your final panning over another container, so a slip doesn't cost you gold, and store your gold in a water-filled vial.

Step 5: Get the gold into the vial

Use a snuffer bottle to pick up fine gold, or tweezers for larger pieces. BLM also suggests a dry finger: small gold sticks to it. Our non-magnetic fine-tip tweezers are made for picking small gold out of concentrates.

Is it really gold?

BLM notes that beginners can confuse gold with pyrite and mica, which can both occur with gold. Pyrite ("fool's gold") is brassy, light yellow and brittle. Mica is light yellow to bronzy, lightweight and platy. Pure gold is soft: BLM puts it at about 2.8 on the 1-to-10 hardness scale, and USGS compares it to the hardness of a penny. BLM also notes that gold's rich yellow color turns paler as its silver content goes up.

Practice at home with paydirt

The easiest way to learn is with material you know has gold in it. Our Carolina Prospectors Gold Panning Kit includes a paydirt bag with gold, a 10.5 in green pan, a vial, a small pipette and complete instructions. Single bags like the 1.5 lb paydirt bag are made for recreational panning and training beginners. Browse all our paydirt bags.

Where to pan in a stream

According to BLM, gold drops out where moving water slows down. Good places to check include slower water below rapids and waterfalls, deep pools, the downstream side of boulders, inside bends, the upstream ends of gravel bars, and bedrock cracks that act like natural riffles. Before you dig, make sure you're allowed to pan there. Check your state and local rules, get the landowner's permission on private land, and remember that on BLM land you can't collect on an existing mining claim without the claimholder's permission.

Common beginner mistakes

  • Rushing. BLM's guide tells beginners to take their time. Patient shaking and swirling lets the gold settle and stay put.
  • Skipping the classifier. Big rocks get in the way and slow you down.
  • Panning with the riffles toward you. Keep them on the far side, pointing away.
  • Using an oily steel pan. Oil can float fine gold right out.

Where to go next

Once you've got the hang of the pan, a sluice box lets you move far more gravel. Keene says adding a sluice box more than quadruples the material you can process. Find more step-by-step help in our guide, How to Choose and Set Up a Gold Sluice Box, and browse sluice boxes. You'll still need your pan, though: Keene notes it's still needed to clean up the sluice box.

FAQ

What size gold pan should a beginner buy?

Keene calls the 14 in pan the most popular all-purpose size, and BLM's panning guide recommends a 14 in pan too. Smaller 8 to 12 in pans are handy for sampling and clean-up.

What color gold pan is best?

Proline makes its Professional Series pans in green, blue and black for contrast, and Keene notes that a black plastic pan makes even tiny flakes easy to see. Pick the color you find easiest to read.

Can I pan for gold at home?

Yes. A paydirt bag, a tub of water and a pan are all you need to practice.